Setting up creator outreach
Steps 1–7 are your domain, about 10 minutes plus up to an hour of DNS waiting. Steps 8–10 are what the AI says, and take about as long again.
AdPlus can email creators on your behalf in two ways. Out of the box it uses a shared AdPlus address, which needs no setup at all but is capped at 4 emails a day. Once you connect your own domain, that cap becomes 200 a day, the email comes from your name rather than ours, and your sending reputation is yours alone.
Send them this page. Everything in step 2 is theirs to do, and it is the only part that needs access to your domain. The exact values they need are shown in AdPlus under Creators → Email setup. Steps 8 to 10 are about what the AI says rather than how the mail travels — those are yours, not theirs.
1. What this gives you
Two things have to work for a creator conversation to happen: the email has to arrive, and their reply has to come back. The records below do one each.
- Three CNAME records let receiving mail servers check that a message really came from you. Without them your mail is unsigned, which is how messages end up in spam and how a domain's reputation gets damaged.
- One MX record delivers creators' replies into AdPlus. Skip it and your outreach will send perfectly and every answer will vanish.
- One TXT record is optional, and lets you see reports on anyone sending mail as you.
AdPlus will not let you send from a domain until both halves check out. A domain that can send but not receive is worse than no setup at all, because everything looks healthy while creators' answers are lost.
2. Pick the right subdomain
Use a subdomain you do not already receive email on — for
example creators.yourcompany.com.
The MX record in step 2 decides where all mail for that name is
delivered. Put it on yourcompany.com and your staff email would come to
AdPlus instead of your inbox.
AdPlus checks this for you: if the domain you type is already receiving mail, it is refused and you are told which subdomain to use instead. But it is worth understanding, because it is the one step that could do real damage.
Any name works — creators., mail.,
partners.. It appears in the From address creators see, so pick something
you are happy for them to read.
3. Add five DNS records
In AdPlus, go to Creators → Email setup, enter your subdomain, and you will get a table of exactly five rows. Each one names what it is for. Add them in your DNS provider — wherever you bought the domain, or Cloudflare, Route 53, GoDaddy, Namecheap, Google Domains and so on.
They will look like this, with your own values:
| Type | Name | Value | What it does |
|---|---|---|---|
| CNAME | em.creators.yourcompany.com | u123.wl456.sendgrid.net | The return path for your outgoing mail |
| CNAME | s1._domainkey.creators.yourcompany.com | s1.domainkey.u123.wl456.sendgrid.net | Signature, part one |
| CNAME | s2._domainkey.creators.yourcompany.com | s2.domainkey.u123.wl456.sendgrid.net | Signature, part two |
| MX | creators.yourcompany.com | mx.sendgrid.net (priority 10) | Brings creators' replies back |
| TXT | _dmarc.creators.yourcompany.com | v=DMARC1; p=none; | Optional reporting |
AdPlus sends your creator mail through SendGrid, which is why the values point there.
4. The two mistakes everyone makes
If verification fails, it is almost always one of these.
Most DNS panels already know your domain and add it for you, so they want just
em.creators in the Name field — not the whole
em.creators.yourcompany.com. Type the full name into a panel like that
and you create
em.creators.yourcompany.com.yourcompany.com, which will never
verify.
After saving, look at what the panel displays back. It should read exactly the name from the table, once.
If your DNS is on Cloudflare, every record here must be set to DNS only — the grey cloud, not the orange one. A proxied record answers with Cloudflare's own servers, so the signature check fails and mail cannot be delivered. Cloudflare cannot proxy email.
5. Press Verify
Back in AdPlus, press Verify. If your DNS provider is quick you will pass immediately; some providers take up to an hour to publish a change, and a few take longer. Nothing is lost by waiting — press Verify again later.
AdPlus checks the signature records and the MX record separately, and tells you which one is not visible yet, so you know whether to keep waiting or to go back and fix a typo.
Until it passes, your campaigns keep running on the shared AdPlus address at 4 a day. Nothing stops while you set this up.
6. Add your postal address
One last field: a postal address, which appears at the bottom of every outreach email alongside the unsubscribe link.
This is not optional and it is not ours to supply. Anti-spam law in the US (CAN-SPAM) and in Europe requires commercial email to carry a real mailing address for whoever sent it — and on your own domain, that is you. A registered office or a PO box is fine. It also does something useful: a creator deciding whether to reply can see there is a real company behind the message.
AdPlus will offer a draft, taken from your billing details or found on your own website, and tell you where it got it. Check it before saving — it is what every creator will see. We will not send from your domain until it is filled in.
7. If something will not verify
- "These records are not visible in DNS yet" — usually time. Wait and press Verify again. If it is still failing after a couple of hours, check the Name field for the doubling-up in step 4.
- "The MX record is missing" — the three CNAMEs were added but the MX was skipped. It is easy to miss because it is a different record type from the others.
- "The MX record is pointing at <something else>" — that subdomain is already used for email. Pick a different one rather than changing the existing record.
- "This domain already receives email" — you entered a domain that handles real mail. Use a subdomain, as in step 1.
- Everything looks right and it still fails — some providers quietly append a dot, or refuse a CNAME with an underscore in it. Email [email protected] with your domain and we will look at what your DNS is actually returning.
A brand-new sending domain that starts at full volume looks exactly like a blast, and receivers treat it as one. So a new domain begins at 10 emails a day and climbs — 25, then 50, then 100 — reaching its full rate after about three weeks of actual sending. Days you do not send do not count, because reputation is built by sending.
If creators start marking the mail as spam, or too much of it bounces, sending stops on its own and tells you why. That is worth more than the volume: one bad week can cost a domain months.
8. Choose how the AI writes
Under Creators → Email setup, each product has a voice. It changes how your outreach reads, and nothing else:
- Direct — plain and brief, no small talk. The default, and the safe choice if you are unsure.
- Warm — friendly and human, still short. Suits consumer brands.
- Professional — more formal and reserved. Suits B2B, finance, health and legal.
- Casual — relaxed, the way one creator writes to another. Suits creator-led brands.
You can change it at any time; it applies to the next message, not to ones already written. Some rules apply whichever voice you pick, because they are what stop the mail being bad rather than what make it sound a particular way: messages stay as short as the question deserves, the same sentences are not reused across a thread, and the AI never invents a detail it was not given. Those are not switchable.
9. Tell it what it may say
A creator who asks a question and gets a vague answer stops replying. One who gets a confident wrong answer is worse, because that becomes something you have to honour. The What it knows tab is where you decide which of those happens.
Anything listed there, the AI may say. Anything else it will not guess at, and it will not send a holding reply either — it simply says nothing and asks you. A few hours between a question and an answer is ordinary business email; an acknowledgement fired back within the minute is one of the clearest signs a machine is writing. With nothing on the list that is every factual question, which is safe but slow, so the list is worth ten minutes.
Four ways to fill it, best first:
- Answers you have already given. When the AI cannot answer something, it emails you the question. Your reply goes to the creator and is remembered — see below. This is the one that costs you nothing and is always right.
- Type a question and its answer. Most businesses have about fifteen that come up again and again and already know them by heart. This is the fastest way to make it useful on day one.
- Upload a document — a media kit, a one-pager, an FAQ. PDF, Word, Markdown, HTML or plain text.
- Read your own site. One click, and the least reliable: a page written for customers is not always true for creators, and a page crawled today is not evidence about next month.
Every entry shows where it came from and has a forget button, including pages we read ourselves. Check the list after a crawl. A fact you cannot remove is worse than no fact.
Questions about fees, rates, usage rights, exclusivity, deadlines or how many posts you want always come to you, whatever is on that list. The AI does not quote a price it worked out, and it does not read one off a document you uploaded. If you answer one of those by email, your words are passed on exactly as you wrote them — not reworded.
10. When it does not know
The AI will hit a real question it cannot answer. When it does it sends the creator nothing, and sends you this:
Ann Lee asked about Artistik — what should I say?
Ann Lee asked something I can't answer for Artistik:
"Do you integrate with Final Cut Pro?"
Reply to this email with the answer and I'll pass it on.
Reply to it the way you would to anyone. Your answer reaches the creator in your chosen voice, usually within a minute of your reply, and is added to What it knows — so the next creator who asks the same thing gets it straight away and you are not asked twice.
Until you reply the creator hears nothing, which is deliberate. From their side it looks like a person who was busy for an afternoon, which is what it is.
- One question per conversation, so a creator asking three things produces one email rather than three.
- Nudged once after a day and a half. After a week it stops asking and flags the conversation instead.
- Changed your mind? Reply again. The correction is sent on and replaces what was remembered.
- Only people on your workspace can answer. Forwarding the email to someone else does not let them reply on your behalf.
11. Questions
Do I have to do this?
No. Without it you stay on the shared
AdPlus address, which works and needs no setup, but is limited to 4 emails a day per
workspace and tells creators the mail was sent via AdPlus.
Why is the shared address capped so low?
Because it is shared.
If one customer sends a large volume of unwanted email from it, the whole domain gets
blocked and every AdPlus customer's outreach stops arriving. The cap keeps
that from being possible. Your own domain has no such problem, which is why its limit
is 50 times higher.
Will creators see "via AdPlus"?
On the shared address, yes
— we think someone deciding whether to reply should know whose mailbox they are
answering. On your own domain, no: you choose what appears next to your name, or
nothing at all.
Can I use the same subdomain for other email?
No. Its MX
record sends all of its mail to AdPlus. Give AdPlus a subdomain of its own.
Does this affect my existing email?
No, as long as you use a
subdomain you do not receive mail on. Nothing here touches your main domain's records.
Your staff email keeps working exactly as it does now.
What if I want to stop?
Turn it off in AdPlus and your
campaigns fall back to the shared address. You can then delete the DNS records at your
leisure — there is no rush, and removing them first is harmless.
Email [email protected] with your domain name and we will tell you exactly what your DNS is returning and what is missing.